BROTHER'S DCP RESET STEP BY STEP INSTRUCTION

 BROTHER'S DCP  RESET STEP BY STEP  INSTRUCTION

1- pull out the AC plug
2- put back the AC plug while holding down the “menu” button and keep holding it (15 sec)
3- now you are entering the MAINTENANCE mode and “error 46” pops up in the display
4- select 8 by using the arrow buttons ,push OK and select 0 and push OK
5- 00:00 00:01 OK (the display is showing this message)
6- now push the MONO button 25 times until you see PURGE: xx xxx
7- Select 2, push ok, select 7,push OK,select 8,push OK, select 3,push ok
8- the purge counter indicates now: purge: 00000
9- switch off the printer ,switch it on
10- ready to print

HOW TO RESET CANON WASTE INK COUNTER

Canon inkjet printer cartridges contain a chip that tracks ink use but doesn't monitor print levels. Refilling inkjet cartridges or using a continuous ink system is an economical solution for many consumers. However, the cartridge chip or the ink counter on the printer may need to be reset periodically. Cartridge resetters are available from many refill ink suppliers; the ink waste counter on Canon printers can also be reset manually.

Instructions

1 - Turn off the printer, unplug the power cord and disconnect the USB cable from the computer.

2-  Press and hold the "Power" and "Resume" buttons and plug the power cord into the outlet to begin printer initialization.

3-  Release the "Power" button (while still holding down the "Resume" button) and then press and hold the "Power" button to activate test mode.

4-  Release the "Power" and "Resume" buttons to activate service mode. Wait for the lights to stop flashing.

5- Press the "Resume" button to cycle through the settings until the message "Reset waste ink counter" or "Ink count" is displayed (press three or four times). If "Ink count" is displayed, press the "0" button to reset.

6- Press the "Set" or "OK" button and then turn the printer off and unplug the power cord. For some Bubble Jet printers, press the "Cartridge" button if prompted on the display to reset the ink counter.

7- Plug the power cord into the outlet, plug the USB cable into the computer and turn the printer on.

Read more: How to Reset a Canon Ink Cartridge Chip | eHow.com http://www.ehow.com/how_5711770_reset-canon-ink-cartridge-chip.html#ixzz2F0wZqkqg